Notifications
Clear all

Kaizen Foam does NOT separate into layers...  

  RSS

Despite repeated promises that Kaizen Foam will separate into layers; implication being each 1/8" layer could be separated easily, smoothly, and fairly evenly I have not been able to separate any pieces between 8" x 12" to 12" x 18" into anything near a smooth, even layers. While I need 12" x 18" sections 1/4" (or even 3/8") thick the best I could get is very rough layers that vacillate between 1/16" to 3/8" (and more) with several rips all the way through. I've tried pulling layers apart at the dark fused area (desirable); at the lighter foam in between fused areas; cutting it with razor blades; cutting it with long kitchen knives (since the razor blades couldn't cut deep enough to make progress in separating layers). I really like the foam and where my use could be satisfied in the shipped thicknesses, I could never achieve the thinner layers that were promised. Any help? cheers, Jim

Quote
Posted : 10/03/2020 8:50 pm
Admin

Have you watched any of our videos?  We have quite a few on this topic.  Go to the video tab on the product page. https://www.fastcap.com/product/kaizen-foam

ReplyQuote
Posted : 11/03/2020 7:46 am
Share: